|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MF432 Datacom, Telecom, General Purpose PIN Photodiodes MF432 ST MF432 SC MF432 Pigtail ST Assembly SC Assembly Pigtail Assembly ST Applications * FDDI * ESCON * ATM-SDH/SONET 155, 622 and 2488Mbps * FITL - Fiber In The Loop * FTTH/FTTC - Fiber To The Home/Curb * Intra-Office Telecommunications * General Purpose SC Applications * FDDI * ESCON * ATM-SDH/SONET 155, 622 and 2488Mbps * FITL - Fiber In The Loop * FTTH/FTTC - Fiber To The Home/Curb * Intra-Office Telecommunications * General Purpose Pigtail Applications * ATM-SDH/SONET 155, 622 and 2488Mbps * FITL - Fiber In The Loop * FTTH/FTTC - Fiber To The Home/Curb Features-All MF432 Devices * 1300 and 1550nm PIN Photodiode * 2.5GHz Bandwidth * Designed for Single-Mode and Multi-Mode Fiber * Aligned in ST(R), SC Receptacle or with a Single-Mode Fiber Pigtail * Tested to Bellcore TA-NWT-000983 * High Return Loss in Pigtail Configuration Description This family of PIN Photodiodes is designed for Datacom, Telecom and General purpose applications. Their unique design combines high bandwidth with high responsivity for single-mode as well as multimode fibers up to 62.5m core diameter. The MF432 PIN Photodiode is available in ST, SC, or Pigtail package. Specially-designed connectors and clips for PC board assembly are included in deliveries of MF432 in SC and Pigtail configurations. The MF431 LED is the recommended transmitter for these PIN photodiodes. Ordering Information PART # RECEPTACLE MF431 ST ST MF 432 SC SC MF 432 Pigtail Pigtail -40C to +85C 13325.11 1997-04-01 13326.11 1997-04-01 13327.11 1997-04-01 14 Datacom, Telecom, General Purpose PIN Photodiodes MF432 MF432 Functional Diagram For ST, SC and Pigtail FIBER ANODE CATHODE CASE BOTTOM VIEW ST SC Pigtail MF432 PIN EMITTER 15 MF432 Datacom, Telecom, General Purpose PIN Photodiodes Absolute Maximum Ratings* Parameter Storage Temperature Operating Temperature Reverse Voltage Soldering Temperature (Note 1) Symbol Tstg Top VR Tsld Min. -40 -40 Max. +85 +85 20 260 Units C C V C *Exceeding these values may cause permanent damage. Functional operation under these conditions is not implied. Note 1: 2mm from the case for 10s. Optical & Electrical Characteristics (Case Temperature -25 to +70C) Parameter Responsivity (Fig 1, 2, 3) Bandwidth Capacitance (Fig 4) Dark Current Symbol R fc C Id Min. 0.7 0.8 2.5 Typ. 0.8 1.0 Max. Units A/W GHz Test Conditions =1300nm (Note 1) =1550nm VR=5V VR=5V RL=50 (Note 1) VR=5V f=1MHz TCase=25C TCase=70C VR=5V (Note 2) 0.8 1.2 3 50 pF nA Return Loss RL 40 55 Note 1: Data for 10/125m single-mode fiber (NA=0.11) to 62.5/125m graded index fiber (NA=0.275). Note 2: With 10/125m single-mode fiber pigtail (NA:0.11). Thermal Characteristics Parameter Temperature Coefficient - Dark Current Symbol dId/dTj Min. Typ. 5 Max. Units %/ C 16 Datacom, Telecom, General Purpose PIN Photodiodes MF432 % 100 % 100 80 80 RELATIVE RESPONSIVITY 60 RELATIVE RESPONSIVITY 60 40 40 r 20 r = opt. Oc = 62.5 m z r 20 z = opt. Oc = 62.5 m z 0 0.5 1.0 1.5 2.0 2.5 3.0 mm 0 0 20 40 60 80 120 m z - AXIAL DISPLACEMENT OF FIBER r - RADIAL DISPLACEMENT OF FIBER Figure 1 Figure 2 % 100 pF 2.0 RELATIVE RESPONSIVITY 50 CAPACITANCE 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 nm 1.0 0 800 0 0 5 10 V WAVELENGTH REVERSE VOLTAGE Figure 3 Figure 4 17 MF432 Datacom, Telecom, General Purpose PIN Photodiodes MF432 ST Mechanical Data 2-56 UNC - 2B max.0.5 3/8"-32 UNEF FIBER END SLOT SIDE 0.006 O2.502 +0.01 0 12.7 2.5 9.5 5.4 0.4 MARKING SIDE O2.5 +0 -0.004 7.89 RECOMMENDED FERRULE (not included) 7.6 min.12 3.9 5.4 20.1 Note: The PIN chip is isolated from the case. All dimensions in mm. MF432 SC Mechanical Data 2.5 12 O2.3 1. 4 x4 MARKING / SLOT SIDE 0.006 13 FIBER END O2.5 +0 -0.004 O7.5 5.4 2.5 22 18 0.4 7.95 8.9 RECOMMENDED FERRULE (not included) min. 12 18 MF432 Pigtail Mechanical Data MARKING 2.5 O6 5.4 0.4 Fiber length 1m min.12 13 O6.00 18 Datacom, Telecom, General Purpose PIN Photodiodes MF432 Typical Receiver Circuit VCC 47F .01F GND 10H 100 10F .01F 220 LED 1 100pF 2 3 4 5 47k 10H 6 7 10F 10H .01F 8 9 10 10F .01F 20 19 18 17 0.1F 8 5 100pF 6 7 4 1F .01F NE5212A 3 2 1 NE5214 16 15 14 13 12 11 MF432 PIN OPTICAL INPUT VOUT (TTL) 5.1k SC Connector on MF432 Pigtail 2.2 - 3.2 A typical Fiber Optic Receiver Circuit interfacing the PIN Photodiode to a Philips NE52121 transimpedance amplifier (140MHz) and to the Philips NE5211 FDDI Fiber Optic Postamplifier. This design is capable of operating at 125Mbps with single +5 or -5.2V supply with differential output impedance of 100k. 60 (max) 7.4 - 7.5 2.0 - 2.2 9.0 - 9.1 ST Packaging Hardware 3/8 - 32 UNEF 2B THREAD 3.3000 MF432 SC Clip R 1.00 MF432 Pigtail Clip 5.6000 80,000 20.8200 10.70 0.50 0.5000 10.25 10.30 9.53 10,2500 10.3000 12.70 1.65 HEX-NUT 4.9500 0.5000 4.5000 4.95 10.41 14.27 5.0800 0.50 4.50 0.46 WASHER 3.6450 0.85 5.08 3.65 19 http://www.mitelsemi.com World Headquarters - Canada Tel: +1 (613) 592 2122 Fax: +1 (613) 592 6909 North America Tel: +1 (770) 486 0194 Fax: +1 (770) 631 8213 Asia/Pacific Tel: +65 333 6193 Fax: +65 333 6192 Europe, Middle East, and Africa (EMEA) Tel: +44 (0) 1793 518528 Fax: +44 (0) 1793 518581 Information relating to products and services furnished herein by Mitel Corporation or its subsidiaries (collectively "Mitel") is believed to be reliable. However, Mitel assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual property rights owned by Mitel or licensed from third parties by Mitel, whatsoever. Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Mitel, or non-Mitel furnished goods or services may infringe patents or other intellectual property rights owned by Mitel. This publication is issued to provide information only and (unless agreed by Mitel in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Mitel without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Mitel's conditions of sale which are available on request. M Mitel (design) and ST-BUS are registered trademarks of MITEL Corporation Mitel Semiconductor is an ISO 9001 Registered Company Copyright 1999 MITEL Corporation All Rights Reserved Printed in CANADA TECHNICAL DOCUMENTATION - NOT FOR RESALE |
Price & Availability of MF432 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |